CSS filtresi Özellik
Örnek
Tüm görüntüleri siyah beyaza değiştirin (%100 gri):
img {
filter: grayscale(100%);
}
İpucu: Aşağıda daha fazla "Kendiniz Deneyin" örnekleri.
Tanım ve Kullanım
Özellik filter
, bir öğeye (genellikle <img>) görsel efektleri (bulanıklık ve doygunluk gibi) tanımlar.
Varsayılan değer: | Yok |
---|---|
Miras: | Hayır |
canlandırılabilir: | Evet. Canlandırılabilir hakkında bilgi edinin |
Sürüm: | CSS3 |
JavaScript sözdizimi: | nesne .style.filter="gri tonlamalı(100%)" |
Tarayıcı Desteği
Tablodaki sayılar, özelliği tam olarak destekleyen ilk tarayıcı sürümünü belirtir.
-webkit- tarafından takip edilen sayılar, bir önekle çalışan ilk sürümü belirtir.
Property | |||||
---|---|---|---|---|---|
filter | 53.0 18.0 -webkit- |
13.0 | 35.0 | 9.1 6.0 -webkit- |
40.0 15.0 -webkit- |
CSS Sözdizimi
filter: none | blur() | brightness() | contrast() | drop-shadow() | grayscale() | hue-rotate() | invert() | opacity() | saturate() | sepia() | url();
İpucu: Birden çok filtre kullanmak için her filtreyi bir boşlukla ayırın (aşağıdaki "Daha Fazla Örnek"e bakın).
Filtre Fonksiyonları
Not: Yüzde değerleri (yani %75) kullanan filtreler, değeri ondalık (yani 0,75) olarak da kabul eder.
Filter | Description | Play it |
---|---|---|
none | Default value. Specifies no effects | |
blur(px) | Applies a blur effect to the image. A larger value will create more blur. If no value is specified, 0 is used. |
|
brightness(%) | Adjusts the brightness of the image. 0% will make the image completely black. 100% (1) is default and represents the original image. Values over 100% will provide brighter results. |
|
contrast(%) | Adjusts the contrast of the image. 0% will make the image completely black. 100% (1) is default, and represents the original image. Values over 100% will provide results with more contrast. |
|
drop-shadow(h-shadow v-shadow blur spread color) | Applies a drop shadow effect to the image. Possible values: h-shadow - Required. Specifies a pixel value for the horizontal shadow. Negative values place the shadow to the left of the image. v-shadow - Required. Specifies a pixel value for the vertical shadow. Negative values place the shadow above the image. blur - Optional. This is the third value, and must be in pixels. Adds a blur effect to the shadow. A larger value will create more blur (the shadow becomes bigger and lighter). Negative values are not allowed. If no value is specified, 0 is used (the shadow's edge is sharp). spread - Optional. This is the fourth value, and must be in pixels. Positive values will cause the shadow to expand and grow bigger, and negative values will cause the shadow to shrink. If not specified, it will be 0 (the shadow will be the same size as the element). Note: Chrome, Safari and Opera, and maybe other browsers, do not support this 4th length; it will not render if added. color - Optional. Adds a color to the shadow. If not specified, the color depends on the browser (often black). An example of creating a red shadow, which is 8px big both horizontally and vertically, with a blur effect of 10px: filter: drop-shadow(8px 8px 10px red); Tip: This filter is similar to the box-shadow property. |
|
grayscale(%) | Converts the image to grayscale. 0% (0) is default and represents the original image. 100% will make the image completely gray (used for black and white images). Note: Negative values are not allowed. |
|
hue-rotate(deg) | Applies a hue rotation on the image. The value defines the number of degrees around the color circle the image samples will be adjusted. 0deg is default, and represents the original image. Note: Maximum value is 360deg. |
|
invert(%) | Inverts the samples in the image. 0% (0) is default and represents the original image. 100% will make the image completely inverted. Note: Negative values are not allowed. |
|
opacity(%) | Sets the opacity level for the image. The opacity-level describes the transparency-level, where: 0% is completely transparent. 100% (1) is default and represents the original image (no transparency). Note: Negative values are not allowed. Tip: This filter is similar to the opacity property. |
|
saturate(%) | Saturates the image. 0% (0) will make the image completely un-saturated. 100% is default and represents the original image. Values over 100% provides super-saturated results. Note: Negative values are not allowed. |
|
sepia(%) | Converts the image to sepia. 0% (0) is default and represents the original image. 100% will make the image completely sepia. Note: Negative values are not allowed. |
|
url() | The url() function takes the location of an XML file that specifies an SVG filter, and may include an anchor to a specific filter element. Example: filter: url(svg-url#element-id) |
|
initial | Sets this property to its default value. Read about initial | |
inherit | Inherits this property from its parent element. Read about inherit |
Daha fazla örnek
Bulanıklaştırma Örneği
Görüntüye bir bulanıklık efekti uygulayın:
img {
filter: blur(5px);
}
Bulanıklaştırma Örnek 2
Bulanık bir arka plan resmi uygulayın:
img.background {
filter: blur(35px);
}
Parlaklık Örneği
Resmin parlaklığını ayarlayın:
img {
filter: brightness(200%);
}
Kontrast Örneği
Görüntünün kontrastını ayarlayın:
img {
filter: contrast(200%);
}
Alt Gölge Örneği
Görüntüye bir alt gölge efekti uygulayın:
img {
filter: drop-shadow(8px 8px 10px
gray);
}
Gri Tonlamalı Örnek
Resmi gri tonlamaya dönüştürün:
img {
filter: grayscale(50%);
}
Ton Döndürme Örneği
Görüntüye bir ton döndürme uygulayın:
img {
filter: hue-rotate(90deg);
}
Ters Örnek
Resimdeki örnekleri ters çevirin:
img {
filter: invert(100%);
}
Opaklık Örneği
Resmin opaklık seviyesini ayarlayın:
img {
filter: opacity(30%);
}
Doygun Örnek
Görüntüyü doyurun:
img {
filter: saturate(800%);
}
Sepya Örneği
Resmi sepyaya dönüştürün:
img {
filter: sepia(100%);
}
Birden Çok Filtre Kullanma
Birden çok filtre kullanmak için her filtreyi bir boşlukla ayırın. Sıranın önemli olduğuna dikkat edin (yani sepia()'dan sonra grayscale() kullanmak tamamen gri bir görüntüyle sonuçlanacaktır):
img {
filter: contrast(200%) brightness(150%);
}
Tüm Filtreler
Tüm filtre işlevlerinin bir gösterimi:
.blur {
filter: blur(4px);
}
.brightness {
filter: brightness(0.30);
}
.contrast {
filter: contrast(180%);
}
.grayscale {
filter: grayscale(100%);
}
.huerotate {
filter: hue-rotate(180deg);
}
.invert {
filter: invert(100%);
}
.opacity {
filter: opacity(50%);
}
.saturate {
filter: saturate(7);
}
.sepia {
filter: sepia(100%);
}
.shadow {
filter: drop-shadow(8px 8px 10px green);
}
İlgili Sayfalar
CSS Eğitimi: CSS Görselleri
HTML DOM referansı: filtre özelliği